Occult Print Design Studio Choose another maker

Occult Print Design Studio

Custom T-Shirt Maker

Upload your design, position it on a heavyweight unisex T-shirt, check the print resolution and choose your size before ordering.

1 Upload2 Position3 Choose size4 Check and order
Live previewFront

Preview guide only. Garment folds, colour and placement can vary slightly in production. Every order receives an artwork check before printing.

Garment and print information

Everything needed to choose the right shirt

The measurements and garment specifications below are based on the supplied Gildan® 5000 product information. Supplier measurements can vary by approximately ±2.5 cm / 1 in.

Full size guide
US sizeLengthGarment chestHalf chest
S71.1 cm / 28 in91.4 cm / 36 in45.7 cm / 18 in
M73.7 cm / 29 in101.6 cm / 40 in50.8 cm / 20 in
L76.2 cm / 30 in111.8 cm / 44 in55.9 cm / 22 in
XL78.7 cm / 31 in122 cm / 48 in61 cm / 24 in
2XL81.3 cm / 32 in132 cm / 52 in66 cm / 26 in
3XL83.8 cm / 33 in142.2 cm / 56 in71.1 cm / 28 in
4XL86 cm / 33.9 in152 cm / 60 in76 cm / 29.9 in
5XL89 cm / 35 in162 cm / 64 in81 cm / 31.9 in
A · Length

Measure from the highest point of the shoulder beside the collar to the bottom hem.

B · Half chest

Lay the garment flat and measure across the chest approximately 2 cm below the sleeves. Garment chest is twice this measurement.

Garment construction and materials
  • Gildan® 5000 heavyweight unisex crewneck T-shirt
  • Relaxed, classic fit
  • Seamless double-needle collar
  • Taped neck and shoulders for durability
  • Double-needle sleeve and bottom hems

Fabric composition

  • Solid colours: 100% preshrunk jersey-knit cotton
  • Ash Grey: 99% Airlume combed and ring-spun cotton, 1% polyester
  • Sport Grey: 90% cotton, 10% polyester
  • Heather colours: 50% cotton, 50% polyester

Material composition depends on the garment colour selected.

DTF printing and embroidery
High-quality DTF print

Your design is printed as a detailed ink transfer and professionally applied to the garment. It is not cut vinyl. DTF is well suited to colourful illustrations, logos and detailed artwork.

Embroidery

The design is stitched with embroidery thread for a textured, durable finish. Embroidery costs more and works best with simpler shapes, clear lettering and fewer very fine details.

Available garment print areas

PlacementMaximum file area
Front30.5 × 40.6 cm
Back30.5 × 40.6 cm
Left sleeve10 × 9 cm
Right sleeve10 × 9 cm
Inner neck7 × 4.9 cm
Outer neck8 × 8 cm

This first maker version prepares front artwork and, when enabled in the Theme Editor, separate back artwork. Sleeve and neck placements are shown for reference and should only be offered once matching Shopify and fulfilment variants exist.

Artwork guidance
  • Use PNG for artwork requiring transparency.
  • JPG, WebP and SVG are also accepted for the live preview.
  • Aim for approximately 300 DPI at the final print size.
  • Use an sRGB colour profile where possible.
  • Avoid semi-transparent effects when a clean solid print is required.
  • Do not enlarge a low-resolution image simply to increase its pixel dimensions.

The builder’s DPI indicator is an estimate based on the uploaded image pixels and selected print width. We still check the supplied artwork before production.

Care instructions
  • Wash inside out in cold water with similar colours.
  • Use a mild detergent and avoid bleach.
  • Hang dry where possible or tumble dry on low.
  • Do not iron directly over the printed or embroidered design.
Custom T-shirt

Free artwork check

Checked by a real person before printing.

Made in the UK

Independent printing with practical support.

Simple ordering

Upload, preview and choose your options.